High Density Polyethylene (HDPE) granules suitable for use in extrusion and blow molding applications, recovered from post consumer bottles.
Additional Notes:
Reported test results are average data that have been obtained after several tests in production. Specific value of the lots can be only issued through certificates of analysis upon request.
Disclaimer:
All the information about chemical and physical properties consists of values measured in tests should only be regarded as
being advisory and does not absolve the customers from doing their own full-scale tests to determine the suitability of the
material for the intended applications. Customers assume all risk and liability arising from your use of the information and/or
use or handling of any product. Figures are indicative and can vary depending on the specific parameters selected and the
production site. GEHA makes no representations, guarantees, or warranties of any kind with respect to the information
contained in this document about its accuracy, suitability for particular applications, or the results obtained or obtainable using
the information. Some of the information arises from laboratory work with small- scale equipment which may not provide a
reliable indication of performance or properties obtained or obtainable on larger-scale equipment. We retain the right to make
changes without prior notice. GEHA makes no warranties or guarantees, express or implied, regarding suitability of either
GEHA supplied products or the information for your process or end-use application. Seller assumes no obligation or liability
for the information in this document. NO WARRANTIES ARE GIVEN; ALL IMPLIED WARRANTIES OF MERCHANTABILITY
OR FITNESS FOR A PARTICULAR PURPOSE ARE EXPRESSLY EXCLUDED.
Material Name | HDPE - GHHD003 | Properties | Values | Unit | Test Method |
Source of the Material | Post Consumer Bottles | Melt Flow Rate | 2.0 - 2.6 | g/10min | EN ISO 133 (190°C , 5.00kg) |
Granule Size | 3 - 6mm | Density | 0.94 - 0.96 | g/cm³ | ISO 1183 |
Mesh Size | N° 120 | Ash Content | <1.5 | % | TS EN ISO 3451-1 |
Packaging | 1,250 kg Big Bags | Moisture | <0.1 | % | TS EN 12099 |
Available Volume | 180 MT / Mo. | HDPE Content | >94 | % | FT-IR |
Delivery Terms | EXW,FOB,CIF,CNF,DAP | Flexural Modulus | * | MPa | ISO 178 |
40' Container | 26,000 kg | Impact Strength | * | Kj/m² | ISO 180 |
20' Container | 13,000 kg | Processing Temp. | 190 - 230 | C° | * |