Semi-Transparent LDPE - GEHA POLİMER

Semi-Transparent LDPE

High quality low density polyethylene (LDPE) granules suitable for use in film applications, recovered from post consumer transparent films.


Additional Notes:

Reported test results are average data that have been obtained after several tests in production. Specific value of the lots can be only issued through certificates of analysis upon request.


Disclaimer: 

All the information about chemical and physical properties consists of values measured in tests should only be regarded as being advisory and does not absolve the customers from doing their own full-scale tests to determine the suitability of the material for the intended applications. Customers assume all risk and liability arising from your use of the information and/or use or handling of any product. Figures are indicative and can vary depending on the specific parameters selected and the production site. GEHA makes no representations, guarantees, or warranties of any kind with respect to the information contained in this document about its accuracy, suitability for particular applications, or the results obtained or obtainable using the information. Some of the information arises from laboratory work with small- scale equipment which may not provide a reliable indication of performance or properties obtained or obtainable on larger-scale equipment. We retain the right to make changes without prior notice. GEHA makes no warranties or guarantees, express or implied, regarding suitability of either GEHA supplied products or the information for your process or end-use application. Seller assumes no obligation or liability for the information in this document. NO WARRANTIES ARE GIVEN; ALL IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE ARE EXPRESSLY EXCLUDED.


Material Name

LDPE - GHLD002

Properties

Values

Unit

Test Method

Source of the Material

Post Con. & Ind. Films

Melt Flow Rate

0.8 - 1.5

g/10min

EN ISO 133 (190°C , 2.16kg)

Granule Size

2 - 6 mm

Density

0.91 - 0.94

g/cm³

ISO 1183

Mesh Size

N° 100

Tensile Strength

11

MPa

ISO 527

Packaging

1,250 kg Big Bags

Elongation at Break

590

%

ISO 527

Available Volume

100 MT/Mo.

Flexural Strength

3.5 - 4.0

MPa

ISO 178

Delivery Terms

EXW,FOB,CIF,CNF,DAP

Flexural Modulus

100

MPa

ISO 178

40' Container

26,000 kg

Impact Strength

44

Kj/m²

ISO 180/1A

20' Container

13,000 kg

Processing Temp.

180 - 210

*



EMAIL SUBSCRIPTION!

By registering for an e-mail subscription, you can be informed first of all about us!